Maintenance Of Linmot® Linear-Rotary Motors; Lubricating Instructions; Storage / Transport - LinMot PR01 Series Manual

LinMot Linear-Rotary Motors
Maintenance of LinMot
The maintenance schedule below is based on a 5-day week with 8 working hours daily. Central European industrial
operating conditions are assumed. Where conditions differ, as with severe and permanent fouling, direct sunshine,
operation out in the open etc., the maintenance intervals must be shortened till empirical values for the particular
application are obtained. Accordingly a distinction is drawn between the maintenance schedules for standard
applications and first applications or arduous conditions.
Maintenance schedule for standard applications
Commissioning
every 3 months
every 6 months
Maintenance schedule for first applications / arduous
Commissioning
after the first 8 hours
after first week
every 3 months
every 6 months
Inspection
The following must be checked when inspecting the drives:
• Is the slider lubricated completely.
• Is the lubricant not 'decomposed?
• Can the slider be moved easily?

Lubricating instructions

The lubricant reduces the friction between the chromium-nickel steel surface of the slider and the plastic plain
bearing. In addition it prevents (fretting) corrosion. The lubricant employed must not attack the material of the plain
bearing and must be temperature resistant up to 150ºC. Important also is that it should retain low viscosity at low
temperatures and not evaporate. The following lubricant is recommended:
®
LinMot Lubricant LU02 Art. No. 0150-1953 (8g)
®
LinMot Lubricant LU02 Art. No. 0150-1954 (50g)
®
LinMot Lubricant LU02 Art. No. 0150-1955 (1000g)
LinMot® LU02 Lubricant corresponds to KLÜBERSYNTH UH1 14-31 which was developed for the food processing industry.

Storage / transport

·Sliders are to be stored and transported only in the plastic containers (with cardboard inlay) provided for this, or already fitted
®
in LinMot motors and secured.
·Maximum storage temperature: 70 ° C
NTI AG/ LinMot
®
Linear-Rotary Motors
Less than 120 strokes/min
Inspection & lubrication
--
Inspection
Less than 120 strokes/min
Inspection & lubrication
Inspection
Inspection
Inspection
Inspection & lubrication
www.LinMot.com
120 - 360 strokes/min
Inspection & lubrication
Inspection
Inspection & lubrication
120 - 360 strokes/min
Inspection & lubrication
Inspection
Inspection
Inspection
Inspection & lubrication
PR_MotorSeries-V2.6e.odt
over 360 strokes/min
Inspection & lubrication
Inspection & lubrication
Inspection & lubrication
over 360 strokes/min
Inspection & lubrication
Inspection
Inspection
Inspection & lubrication
Inspection & lubrication
66/71