Usage And Operations; Duties Of The Plant Operator - Viessmann Vitobloc 200 EM-50/81 Operating Instructions Manual

Usage and operations

5 Usage and operations
5.1

Duties of the plant operator

●
check leakages
CAUTION
When the smell of gas is detected or in
the case of other risks, see section 1.3.
"Hazard warnings" and section 5.4
"Emergency".
CAUTION
Immediately request the maintenance
service and turn off the block-type
thermal power station if there are waste
gas, water or oil leaks on the module.
●
check displays and noise
-
display of the operating mode: «AUTO» (Fig.
23, item 1).
LED display of the operating mode „Ready ":
-
the green LED "Ready" will be lit, when the au-
tomatic mode is ready for operation and
the Lambda control valve is in its start position
(Fig. 23, item 2).
LED display of the operating mode "Operation":
-
the green LED "Operation" will be lit, when the
engine is running and alternator contactor has
been switched on (in the "Operation" mode,
both the LED "Ready" and the LED "Operation"
will be lit) (Fig. 24, item 2)
●
for checking the engine values press function key
F2 (Fig. 24)
VITOBLOC 200 Operating instructions for the natural gas-fuelled CHP module
Fig. 23 Basic configuration for checking the automatic
mode
Fig. 24 Display of the engine values with function key F2;
return to the basic configuration with key C (nu-
merical field)
43