Filling Fuels - Viessmann Vitobloc 200 EM-50/81 Operating Instructions Manual

Preparations
2.2

Filling Fuels

2.2.1 Disassembling/Assembling the
Sound Hood
CAUTION
Only ever use the supplied original cab-
inet spanner to avoid damage to the
locks.
Always remember the following when opening and
closing the locks:
Closing:
Raise the sound hood plate and press against the
corresponding frame.
Caution: There is the danger of breakage if the sound
hood plate drops. This is why it is necessary to wear
protective clothing/shoes.
The lock is open in the initial position
(the dot marks on the lock are 180° to
one another)
Lock the sound-absorbing hood and
turn the spanner 90°
(the dot marks on the lock are now 90°
to one another)
Press on the sound-absorbing hood
while turning the spanner another 90°
(the dot marks on the lock are now op-
posite one another)
VITOBLOC 200 Operating instructions for the natural gas-fuelled CHP module
Opening:
Raise the sound hood plate and press against the
corresponding frame.
Caution: There is the danger of breakage if the sound
hood plate drops. This is why it is necessary to wear
protective clothing/shoes.
The lock is closed in the initial position
(the dot marks on the lock are opposite
one another)
Press on the sound-absorbing hood
while turning the spanner 90°
(the dot marks on the lock are now 90°
to one another)
Turn the spanner another 90°
(the dot marks on the lock are now 180°
to one another)
17