Commissioning
3.2
Measuring and setting points for the commissioning
WARNING
The position of the measuring and set-
ting points is only roughly indicated in
the pictures & graphs. They are meant
to be an aid especially for the duly au-
thorized personnel that have been
trained about the measuring and setting
points on the module's control panel by
the CHP module manufacturer.
Measuring and setting points on the module's control panel
3.2.1
Schematic diagram of the measuring and setting points on the module's control panel
Fig. 6
VITOBLOC 200 Operating instructions for the natural gas-fuelled CHP module
The marking on the assemblies and the cables of the
actually delivered modules as well as the order-
related switching and assembly diagrams are binding.
25