Preparations; Consumables - Viessmann Vitobloc 200 EM-50/81 Operating Instructions Manual

Block-type thermal power plant module for natural gas operation
Table of Contents

Advertisement

Preparations

2
Preparations
LIABILITY
Inform the warranty office in writing be-
fore commissioning the plant, when us-
ing the specified or approved operating
supplies (see assembly instructions in
the chapter „Notification about the
plant's readiness for commissioning"),
as this is the prerequisite for having any
warranty claims acknowledged.
When being used improperly or not fort he intended
purpose, operating supplies will be an environmental
hazard. Do not let them penetrate the ground or flow
into the sewer system.
2.1

Consumables

2.1.1
Natural gas, the fuel
Gaseous fuels consist largely of methane, propane
and butane as well as traces of higher hydrocarbons
and inert components, such as carbon dioxide and
Nitrogen.
The valid regulations applicable for gas installa-
tions must be observed.
Smoking and open flames are not permitted.
Leakages in the gas supply system pose a risk of
explosion and must be eliminated immediately.
Fire extinguishers and other fire fighting equipment
must be kept within reach.
Do not store any flammable materials in the engine
room.
10
Operating instructions for the natural gas-fuelled CHP module VITOBLOC 200

Advertisement

Table of Contents
loading

Table of Contents