Viessmann Vitobloc 200 EM-50/81 Operating Instructions Manual page 2

Legal notice
This equipment satisfies the basic require-
ments of the appropriate standards and di-
rectives. Its conformity has been demon-
strated. These documents and the original
conformity declaration are stored on the
premises of the manufacturer.
NOTE
The Vitobloc 200 cogeneration module is
not suited to 60 Hz operation which means
that it is in particular not available to the
American and Canadian market.
Important general instructions for application
Only use this technical equipment as intended and com-
plying with the assembly instructions, operating instruc-
tions and service instructions. Only authorised profes-
sionals should service and repair it.
Only operate this technical equipment in the combinations
and with the accessories and replacement parts referred
to in the assembly instructions, operating instructions and
service instructions. Only use other combinations, acces-
sories and wear parts if they are explicitly intended for the
specific application and do not impair the performance
features or safety requirements.
Subject to change without notice.
This is a component of the original operating instructions.
Figures, steps in certain functions and technical data may
differ slightly due to constant advancements.
2
Operating instructions for the natural gas-fuelled CHP module VITOBLOC 200