Removing The Microsd Card; Installing The Microsd Card - Dell EMC PowerEdge T340 Installation And Service Manual

3 Follow the procedure that is listed in

Removing the MicroSD card

Prerequisites
1 Follow the safety guidelines listed in the
2 Follow the procedure listed in the
3 Remove the air shroud.
4 Remove the IDSDM or vFlash module.
Steps
1 Locate the MicroSD card slot on the vFlash/IDSDM module, and press the card to partially release it from the slot. To locate IDSDM/
vFlash module, see the
2 Hold the MicroSD card and remove it from the slot.
NOTE: Temporarily label each MicroSD card with its corresponding slot number after removal.
Figure 63. Removing the MicroSD card
Next step
1 Replace the MicroSD cards.

Installing the MicroSD card

Prerequisites
1 Follow the safety guidelines listed in the
90 Installing and removing system components
After working inside your
Safety instructions.
Before working inside your
System board jumpers and connectors
Safety instructions.
system.
system.
section.