Siemens SCALANCE W780 Configuration Manual page 60

Configuring with Web Based Management
5.1 Web Based Management
Requirements
WBM display
● The device has an IP address
● There is a connection between the device and the client device. With the Windows ping
command, you can check whether or not a connection exists.
● Access via HTTPS is enabled.
● JavaScript is activated in the Web browser.
● The Web browser must not be set so that it reloads the page from the server each time
the page is accessed. The updating of the dynamic content of the page is ensured by
other mechanisms. In the Internet Explorer, you can make the appropriate setting in the
"Options > Internet Options > General" menu in the section "Browsing history" with the
"Settings" button. Under "Check for newer versions of stored pages:", select
"Automatically".
● If a firewall is used, the relevant ports must be opened.
– For access using HTTP: Port 80
– For access using HTTPS: Port 443
● The display of the WBM was tested with the following desktop Web browsers:
– MS IE 10
– Mozilla Firefox ESR31
Display of the WBM on mobile devices
● The display of the WBM was tested with the following Web browsers for mobile devices:
– Safari as of V7 on iOS as of V7.1.1 (iPad mini Model A1432)
– Chrome as of V32 on Android as of version 4.4.3 (Nexus 7C Asus),
● Minimum resolution: 960 x 640 pixels
Note
Display of the WBM and working with it on mobile devices
The display on the WBM pages and how you work with them on mobile devices may differ
compared with the same pages on desktop devices. Some pages also have an optimized
display for mobile devices.
60
Note
Compatibility view
In Microsoft Internet Explorer, disable the compatibility view to ensure correct display
and to allow problem-free configuration using WBM.
SCALANCE W780/W740 to IEEE 802.11n Web Based Management
Configuration Manual, 03/2015, C79000-G8976-C267-08