Client - Siemens SCALANCE W780 Configuration Manual

Procedure
To configure a certain data transmission speed on WLAN 1:
1. For "WLAN 1", select the option "Use selected data rates only".
2. From the "Radio" drop-down list, select the entry "WLAN 1".
3. Select the corresponding check box in the "Enabled" column for the selected MCS index.
4. Click the "Set Values" button.
To reset the selection:
1. Click the "Default Values" button. The selection is reset to the default setting.
Or
1. Disable the "Use selected data rates only" option in Table 1.
2. Click the "Set Values" button.
5.6.2.10

Client

Connecting to a network
With this menu command, you can specify how the device connects to a network as client.
Note
This tab is only available in the client mode.
SCALANCE W780/W740 to IEEE 802.11n Web Based Management
Configuration Manual, 03/2015, C79000-G8976-C267-08
Configuring with Web Based Management
5.6 "Interfaces" menu
237