V3 Users - Siemens SCALANCE W780 Configuration Manual

5.5.11.4

v3 Users

User-specific security settings
On the WBM page, you can create new SNMPv3 users and modify or delete existing users.
The user-based security model works with the concept of the user name; in other words, a
user ID is added to every frame. This user name and the applicable security settings are
checked by both the sender and recipient.
Description
The page contains the following boxes:
● User Name
Enter a freely selectable user name. After you have entered the data, you can no longer
modify the name.
The table has the following columns:
● Select
Select the row you want to delete.
● User Name
Shows the created users.
● Group Name
Select the group to which the user will be assigned.
● Authentication Protocol
Specify the authentication protocol. Can only be enabled, if this group supports the
function.
The following settings are available:
– none
– MD5
– SHA
SCALANCE W780/W740 to IEEE 802.11n Web Based Management
Configuration Manual, 03/2015, C79000-G8976-C267-08
Configuring with Web Based Management
5.5 "System" menu
179