Iref - Siemens SCALANCE W780 Configuration Manual

Configuring with Web Based Management
5.10 "iFeatures" menu
5.10.3

iREF

Note
• This tab is available only in access point mode.
• This WBM page can only be configured with the following KEY-PLUG:
– Access point: W780 iFeatures (MLFB 6GK5 907-8PA00)
When should iREF be used?
With iREF, the data can be sent with the highest possible transmit power. This applies in
particular to use cases in which MIMO cannot be used, is of no advantage or when using
sector antennas.
Note
Use of iREF with other iFeatures
iREF and other iFeatures (e.g. iPCF, iPCF-MC) are not compatible with each other and
cannot be used at the same time on a device.
292
SCALANCE W780/W740 to IEEE 802.11n Web Based Management
Configuration Manual, 03/2015, C79000-G8976-C267-08