Spanning Tree; General - Siemens SCALANCE W780 Configuration Manual

Description
The page contains the following boxes:
● "Dynamic MAC Aging" check box
Enable or disable the function for automatic aging of learned MAC addresses:
● "Aging Time [s]" input box
Enter the time in seconds. After this time, a learned address is deleted if the device does
not receive any further frames from this sender address. The range of values is from 10
seconds to 1000000 seconds
Procedure
1. Select the "Dynamic MAC Aging" check box.
2. Enter the time in seconds in the "Aging Time [s]" input box.
3. Click the "Set Values" button.
5.7.3

Spanning Tree

5.7.3.1

General

General settings of spanning tree
On this page, you configure the settings for MSTP. As default, Rapid Spanning Tree is
enabled that can be set to the MSTP, RSTP or STP compatible mode with a switch.
On the configuration pages of these functions, you can make detailed settings.
Depending on the compatibility mode, you can configure the corresponding function on the
relevant configuration page.
Note
Client device not as root
Using the configuration of priorities and path costs, make sure that a client device can never
become the root node. If a client device becomes the root node the Rapid Spanning Tree
function no longer works.
SCALANCE W780/W740 to IEEE 802.11n Web Based Management
Configuration Manual, 03/2015, C79000-G8976-C267-08
Configuring with Web Based Management
5.7 "Layer 2" menu
251