Hose Rewind; Device Base - Atmos E 341 Operating Instructions Manual

3.6 Hose rewind

Removal
Prerequisite: Hose is taken off .
1. Pull the wings outwards so that the hose rewind can be released.
2. Pull the hose rewind from the device.
Mounting
Prerequisite: Device base and battery compartment cover are attached.
1. Turn the hose rewind so that the opening points upwards.
2. Attach the hose rewind with force to the support on the left side of the device until
it clicks into place.

3.7 Device base

Removal
Prerequisite:
The following parts are removed:
• Canister system
• Support for canister system
• Hose rewind
• Battery compartment cover
1. Put the device carefully on the front.
26 Setting up and starting up
click click