1.7 Transport and storage
Transport the device only in a shipping carton, which is padded and offers sufficient
protection.
If you notice any damage:
1. Document and report the transport damage.
2. Fill in the form QD 434 "customer complaint/return shipment". This form is enclosed
to each delivery and can be found at www.atmosmed.com.
3. Send in the device to ATMOS (chapter „6.3 Sending in the device" on page 40).
Ambient conditions during transport and storage:
•
Temperature:
•
Relative air humidity: 5...95 % without condensation
•
Air pressure:
10
Introduction
- 40...+ 70 ° C
540...1100 hPa