Atmos E 341 Operating Instructions Manual page 20

canister lid.
11. If required: Remove the fl oat ball
canister lid
Connection
When you pour 50-100 ml water or disinfectant into the secretion canister, then it is

easier to clean.
1. Press the outer canister lid
2. Open the fl oat ball compartment
3. Gently press the fl oat ball compartment together.
4. Check whether the fl oat ball moves easily and does not fall out of the fl oat ball
compartment.
5. Place the secretion canister on a fi rm surface.
6. Please observe the correct position of the canister lid prior to pressing it onto the
secretion canister.
7. Press the canister lid tightly with both hands as far as it will go onto the secretion
canister.
8. Place the sealing ring
9. Insert a new bacterial fi lter
20 Setting up and starting up
.
1
1 2
3
1
2 3
onto the fi lter holder
6
6
5 6
5
7
6
from the fl oat ball compartment
3
Inner canister lid
1
Float ball compartment
2
Float ball
3
Outer canister lid
4
4
on the inner canister lid
4
gently and insert the fl oat ball
2
.
5
onto the fi lter holder
7
of the inner
2
, until it clicks into place.
1
.
3
.
5