Serres - Atmos E 341 Operating Instructions Manual

3.5.2 Serres

canister system
®
Removal
1. Remove the connection angle.
2. Push the support for the Serres
take it out of the guides.
Mounting
1. Attach the support for the Serres
the device. The bars at the support must be fi tted to the two guides at the device.
2. Slide the support for the Serres
device. The inlet to the pump must be visible.
3. Connect the vacuum hose with the connection angle.
canister system backwards up to the middle and
®
canister system in the middle on the right side of
®
canister system forward until it is fl ush with the
®
Setting up and starting up
25