Control Panel - Atmos E 341 Operating Instructions Manual

3.1.2 Control panel

LEDs for the display of the current vacuum
1
Battery status display
2
Control button battery status
3
Button to select the desired vacuum
4
On/off button
5
Display of the battery status
The following display values are not valid during battery charging.
1.
> 85 %
Prior to the battery going dead a signal tone sounds every 5 seconds.
An error is present if all the green LEDs fl ash simultaneously or all LEDs are fl ashing.
Please observe chapter „7.0 Troubleshooting" on page 43.
16 Setting up and starting up
1
5 4
2. 3.
60 - 85 % 35 - 60 % < 15 - 35 % < 10 - 15 %
4.
5.
Flashes
2
3
6.
Green and
red LED
fl ash
< 10 %