Installing the Cisco SCE8000 GBE Chassis in the Rack
Table 4-6
Task No.
5
6
Installing the Cisco SCE8000 GBE Chassis in the Rack
This section describes how to install a Cisco SCE8000 GBE platform in a rack. For first-time
installations, perform the procedures in the following sections in the order listed:
•
•
•
•
•
•
Before starting the installation procedures in this chapter, see the
Note
verify that all site planning activities were completed.
Cisco SCE8000 GBE Installation and Configuration Guide
4-14
Site Planning Checklist (continued)
Planning Activity
Cable and interface equipment
evaluation:
Cable type
•
Connector type
•
Cable distance limitations
•
EMI evaluation:
•
Distance limitations for signaling
Site wiring
•
RFI levels
•
Unpacking the Cisco SCE8000 GBE Chassis, page 4-15
Installation Guidelines, page 4-15
Required Tools, page 4-16
Installing the Chassis Brackets, page 4-16
Installing the Chassis in the Rack, page 4-17
Installing an Optical Bypass Module, page 4-19
Chapter 4
Installing the Cisco SCE8000 GBE Chassis
Verified By
Time
Site Planning Checklist, page 4-13
Date
to
OL-19897-02