Examples For Shutting Down The Sce Platform - Cisco SCE8000 GBE Installation And Configuration Manual

Chapter 7 Basic Cisco SCE8000 GBE Platform Operations
Rebooting and Shutting Down the SCE Platform

Examples for Shutting Down the SCE Platform

The following example shows the commands for system shutdown.
SCE#reload shutdown
You are about to shut down the system.
The only way to resume system operation after this
is to cycle the power off, and then back on.
Continue?
y
IT IS NOW SAFE TO TURN THE POWER OFF.
Since the SCE platform can recover from the power-down state only by being physically turned off (or
Note
cycling the power), this command can only be executed from the serial CLI console. This limitation
helps prevent situations in which a user issues this command from a Telnet session, and then realizes he
or she has no physical access to the SCE platform.
Cisco SCE8000 GBE Installation and Configuration Guide
7-23
OL-19897-02