Cabling The Gbe Line Interface Ports - Cisco SCE8000 GBE Installation And Configuration Manual

Cabling the GBE Line Interface Ports

Table 6-2
Connect this port on the external
bypass module.
C2
D2
CTRL (use the short leg of the 'Y'
control cable labeled OPB CTRL1)
External bypass module #4
A1
B1
C1
D1
A2
B2
C2
D2
CTRL (use the short leg of the 'Y'
control cable labeled OPB CTRL2)
Cabling the GBE Line Interface Ports
When installing an External Optical Bypass module, the Cisco SCE8000 GBE line ports are connected
Note
to the module. See
page 6-9
Class 1 laser. Avoid exposure to radiation and do not stare into open aperture.
Warning
•
•
•
Cisco SCE8000 GBE Installation and Configuration Guide
6-6
Optical Bypass Module Connectivity (continued)
Cabling the Line Interface Ports: Using the External Optical Bypass Module,
for complete instructions.
SFP Module Cabling and Connection Equipment, page 6-7
How to Cable the GBE Line Interface Ports, page 6-9
Cabling the Line Interface Ports: Using the External Optical Bypass Module, page 6-9
Chapter 6 Cabling the GBE Line Ports and Completing the Installation
To this component
SPA port 3/1/2
SPA port 3/1/3
right-hand 'Optical Bypass' port on Cisco
SCE8000-SCM-E module (use the long leg of
the 'Y' control cable; it is labeled SCE8000
GBE -2L BYPASS)
Subscriber side network element 6
Network side network element 6
SPA port 3/1/4
SPA port 3/1/5
Subscriber side network element 7
Network side network element 7
SPA port 3/1/6
SPA port 3/1/7
right-hand 'Optical Bypass' port on Cisco
SCE8000-SCM-E module (use the long leg of
the 'Y' control cable; it is labeled SCE8000
GBE -2L BYPASS)
Link number
5
5
5
6
6
6
6
7
7
7
7
OL-19897-02