Removing The Memory Module; Prerequisites; Procedure - Dell 5000 Service Manual

NOTE: Before working inside your Embedded Box PC, read the safety information that shipped with your Embedded Box
PC and follow the steps in
follow the steps in After working inside your Embedded Box
Compliance home page at www.dell.com/regulatory_compliance.
Topics:
•

Prerequisites

•

Procedure

Prerequisites
1. Follow step 1 to step 6 in "Removing the back
2. Remove the PCI/PCIe card
Procedure
1. Use your fingertips to carefully spread apart the securing-clips on each end of the memory-module slot until the memory module pops
up.
2. Remove the memory module from the memory-module slot.
a. memory module
b. memory-module slot

Removing the memory module

Before working inside your Embedded Box
cover".
(if installed).
PC. After working inside your Embedded Box PC,
PC. For more safety best practices, see the Regulatory
Removing the memory module
17
33