NOTE:
Before working inside your Embedded Box PC, read the safety information that shipped with your Embedded Box
PC and follow the steps in
follow the steps in
After working inside your Embedded Box
Compliance home page at www.dell.com/regulatory_compliance.
Topics:
•
Procedure
•
Post-requisites
Procedure
1. Place the SIM card into the SIM-card slot.
2. Close the SIM-card slot.
3. Slide the SIM-card slot lock sway from the mPCIE1 connector to secure the SIM-card slot.
a. SIM-card slot
b. SIM-card slot lock
c. SIM-card
Post-requisites
1. Replace the
WWAN
card.
Before working inside your Embedded Box
Replacing the SIM card
PC. After working inside your Embedded Box PC,
PC. For more safety best practices, see the Regulatory
28
Replacing the SIM card
51