Installing The Sd Card Reader; Removing The Memory Module; Installing The Memory Module - Dell CFG-18180895 Owner's Manual

Installing the SD card reader

1. Insert the SD card reader into the slot on the system board.
2. Tighten the screw to secure the SD card reader to the system board
3. Connect the SD card reader cable to the connector on the system board.
4. Close the front bezel door.
5. Install the:
a. bezel
b. cover
6. Follow the procedure in

Removing the memory module

1. Follow the procedure in
2. Remove the:
• cover
• bezel
3. Open the front bezel
4. To remove the memory module:
a. Press the memory module retention tabs on both sides of the memory module.
b. Lift the memory module from the memory module connector on the system board.

Installing the memory module

1. Align the notch on the memory module with the tab on the memory module connector.
2. Insert the memory module into the memory module socket.
3. Press the memory module until the memory module retention tabs click into place.
4. Close the front bezel door.
5. Install the:
a. cover
b. bezel
6. Follow the procedure in
16
After Working Inside Your
Before Working Inside Your
door.
After Working Inside Your
Computer.
Computer.
Computer.