Installing The Fan Duct; Removing The Memory Module; Installing The Memory Module; Removing The Intrusion Switch - Dell OptiPlex 7040-Small Form Factor Owner's Manual

Installing the fan duct

Steps
1. Align the slots on the fan duct, with the screws on the heat sink.
2. Insert the fan duct until it clicks into place.
3. Install the cover.
4. Follow the procedure in

Removing the memory module

Steps
1. Follow the procedure in
2. Remove the:
a. cover
b. fan duct
c. hard drive assembly
d. optical drive
3. To remove the memory module:
a. Press the memory module retention tabs on both sides of the memory module.
b. Lift the memory module from the memory module connector on the system board.

Installing the memory module

Steps
1. Align the notch on the memory module with the tab on the memory module connector.
2. Insert the memory module into the memory module socket.
3. Press the memory module until the memory module retention tabs click into place.
4. Install the:
a. optical drive
b. hard drive assembly
c. fan duct
d. cover
5. Follow the procedure in

Removing the intrusion switch

Steps
1. Follow the procedure in
After Working Inside Your
Before Working Inside Your
After Working Inside Your
Before Working Inside Your
Computer.
Computer.
Computer.
Computer.
Removing and installing components 9