NOTE:
Before working inside your Embedded Box PC, read the safety information that shipped with your Embedded Box
PC and follow the steps in
follow the steps in
After working inside your Embedded Box
Compliance home page at www.dell.com/regulatory_compliance.
Topics:
•
Prerequisites
•
Procedure
Prerequisites
1. Follow step 1 to step 6 in
"Removing the back
2. Remove the
PCI/PCIe card
Procedure
1. Disconnect the antenna cables connected to the WWAN card.
2. Remove the screws that secure the WWAN card to the system board.
3. Slide and remove the WWAN card from the mPCIE1 slot.
1. WWAN card
46
Removing the WWAN card
Removing the WWAN card
Before working inside your Embedded Box
cover".
(if installed).
PC. After working inside your Embedded Box PC,
PC. For more safety best practices, see the Regulatory
2. WWAN-antenna cables (2)
25