NOTE:
Before working inside your Embedded Box PC, read the safety information that shipped with your Embedded Box
PC and follow the steps in
follow the steps in
After working inside your Embedded Box
Compliance home page at www.dell.com/regulatory_compliance.
Topics:
•
Prerequisites
•
Procedure
Prerequisites
1. Follow step 1 to step 6 in
"Removing the back
2. Remove the
PCI/PCIe card
3. Remove the
WWAN-antenna
4. Remove the
WLAN-antenna
5. Remove the
serial
ports.
Procedure
1. Remove the screws that secure the top cover to the chassis.
2. Remove the top cover off the chassis.
a. M3x5 countersunk screws (7)
b. bottom cover
c. chassis
68
Removing the bottom cover
Removing the bottom cover
Before working inside your Embedded Box
cover".
(if installed).
connectors.
connectors.
PC. After working inside your Embedded Box PC,
PC. For more safety best practices, see the Regulatory
39