7. Install the:
a)
HDD assembly
b)
Front bezel
c)
Side cover
8. Follow the procedure in
Memory module
Removing memory module
1. Follow the procedure in
2. Remove the:
a)
Side cover
b)
Front bezel
c)
HDD assembly
d)
Hard drive and optical drive module
3. To remove the memory module:
a) Pry open the retention tabs from both sides to lift the memory module from the connector [1].
b) Remove the memory module from the system board [2].
After working inside your
computer.
Before working inside your
computer.
Removing and installing components
39
Need help?
Do you have a question about the OptiPlex 3070 Small Form Factor and is the answer not in the manual?
Questions and answers