NOTE:
Before working inside your Embedded Box PC, read the safety information that shipped with your Embedded Box
PC and follow the steps in
follow the steps in
After working inside your Embedded Box
Compliance home page at www.dell.com/regulatory_compliance.
Topics:
•
Procedure
•
Post-requisites
Procedure
1. Install the PCI/PCIe cards in their respective slots on the riser board.
a. riser card
b. PCIe-card slot
c. PCIe card
2. Replace the filler plate for an empty card slot.
3. Replace the bracket on the chassis.
4. Replace the screw that secures the bracket to the chassis.
Before working inside your Embedded Box
Replacing the PCIe card
PC. After working inside your Embedded Box PC,
PC. For more safety best practices, see the Regulatory
16
Replacing the PCIe card
31