Replacing The Power Switch; Procedure; Post-Requisites - Dell 5000 Service Manual

NOTE: Before working inside your Embedded Box PC, read the safety information that shipped with your Embedded Box
PC and follow the steps in
follow the steps in After working inside your Embedded Box
Compliance home page at www.dell.com/regulatory_compliance.
Topics:
•

Procedure

•

Post-requisites

Procedure
1. Route the power switch and power-switch cable thought the slot on the top cover.
2. Push the power switch in to the slot and snap the power switch in place.
Post-requisites
1. Replace the top cover.
2. Replace the power connectors.
3. Replace the riser card.
4. Replace the CANbus cable.
5. Replace the PCI/PCIe card
6. Follow step 2 to step 8 in "Replacing the back
84

Replacing the power switch

Replacing the power switch
Before working inside your Embedded Box
(if necessary).
cover".
PC. After working inside your Embedded Box PC,
PC. For more safety best practices, see the Regulatory
50