Presence Detection Sensor - SMART Board SPNL-6365-V3 Manual

CHAPTER 1
WELCOME
The Standby button also functions as an indicator light:
Indicator light Status
Solid white Normal operation
Off Not receiving power
Solid amber DPMS (power
management) mode
Slowly flashing Standby mode
amber
Flashing amber No USB connection from
the connected computer
Slowly flashing SMART Board service not
white running on the connected
computer

Presence detection sensor

The display has a presence detection
sensor on its bottom frame that can detect
people up to 16' (5 m) away when the
display is in Standby mode.
If the Turn On Display option is enabled,
the display turns on when the sensor
detects people in the room. If the room is
empty for a specified period, the display
returns to Standby mode.
10 smarttech.com/kb/171166
Procedure
[N/A]
Confirm the display's power cable is
l
connected to the power outlet.
Flick the switch beside the AC power inlet
l
to the ON (I) position.
Press the Standby button
l
DPMS mode.
Connect an input source.
l
Press the Standby button
l
Standby mode.
If presence detection is enabled, move in
l
range of the presence detection sensor.
If Wake to Touch is enabled, touch the
l
screen.
Verify the connections to the computer.
l
Switch to the computer's input.
l
See Viewing a connected computer's
input on page 27.
Ensure that SMART Product Drivers is
installed and that the SMART Board
service is running.
to exit
to exit