Using The Smart Ink Dynamic (Floating) Toolbar; Changing A Pen's Default Color, Thickness, And Other Properties; Erasing Digital Ink - SMART Board 6000S Series User Manual

CHAPTER 2
USING BASIC FEATURES

Using the SMART Ink dynamic (floating) toolbar

If you pick up a pen while viewing a connected computer's input, the
SMART Ink® dynamic (floating) toolbar for SMART Ink appears on the
screen. You can use this toolbar to temporarily change the pen's color,
thickness, or other properties, you can also access SMART Ink's tools,
such as screen capture, spotlight, screen shade, and so on.
To learn more about SMART Ink and its toolbar, visit the
support page. Here are a few quick links to get you started:
Turning SMART Ink on or off
l
Opening the dynamic (floating) toolbar
l
Closing (hiding) the toolbar
l
Using SMART Ink presentation tools
l

Changing a pen's default color, thickness, and other properties

While you're viewing a connected computer's input, you can use the SMART Ink dynamic (floating)
toolbar to change a pen's color, thickness, and other properties.
To change the pen's default color, thickness, and other properties, see
button settings.

Erasing digital ink

CAUTION
When you return an eraser to a magnetic holder, make sure it's centered in its holder to keep it
from falling and being damaged.
You can erase digital ink from the screen using an eraser or your palm or fist:
Move a pen's eraser over digital ink to erase.
OR
Move the eraser over digital ink to erase.
OR
19 smarttech.com/kb/171415
SMART Ink
Changing pen, eraser, and