Using The Home Button - SMART Board 6000S Series User Manual

CHAPTER 2
USING BASIC FEATURES
If the display is on, it will return to Ready mode when one of the following occurs:
The sensor detects no motion in the room for 60 minutes.
l
You press the Power button
l
The display enters Standby mode 60 minutes after entering Ready mode when the sensor doesn't
detect anyone in the room.
For information about turning off the display, see the SMART Board 6000S and 6000S Pro series
interactive displays installation and maintenance guide (smarttech.com/kb/171414).

Using the Home button

You can use the Home screen to open and use iQ apps, view the input of connected computers,
and more. You can also change the background and personalize other features of the Home
screen. To learn more about the Home screen, see
The Input screen shows thumbnails of connected computers and allows you to switch among
inputs.
You can return to the Home screen or the Input screen at any time by following the instructions
below.
To show the Home screen or the Input screen
Tap the Home button
OR
Press the Home button
12 smarttech.com/kb/171415
on the convenience panel.
Understanding the Home
below the screen.
on the remote control.
screen.