Setting The Handpieces; Adjusting Functions - KaVo ESTETICA E30 Short Instructions For Use

Setting the handpieces

6 Setting the handpieces

6.1 Adjusting functions

▶ Settings can be changed using the corresponding keys on the control panel or on the foot control.
Motor speed is set with the foot control only.
The direction of motor rotation, cooling status and light intensity are set with the foot control or the
control keys.
The current settings are saved and activated the next time the handpiece is taken out.
Setting
Motor speed
Light intensity
Direction of motor rotation
Spray status
Saving the values
▶ Press the "Save" key to save the values. You can save after setting each value, or
after setting all values.
Saving is acknowledged by a beep.
speed/intensity
▶ Remove the handpiece (e.g. turbine, motor, etc.) from the holder.
The handpiece is active.
▶ Press the foot pedal.
The removed handpiece runs at the set speed or intensity.
▶ Changing speed or intensity with the foot pedal.
The left stop corresponds to the minimum speed/intensity.
The right stop corresponds to the maximum speed/intensity.
Setting the light intensity
Only the spray status and light intensity can be set for air instruments.
Actuation
Foot control
Foot control, control keys
Foot control, control keys
Foot control, control keys
Pane
Display
Display
LED control keys
LED control keys
13