Operate Handpieces With The Foot Control - KaVo ESTETICA E30 Short Instructions For Use

Operate handpieces with the foot control

7 Operate handpieces with the foot control
▶ Remove the handpiece (such as turbine, motor) from the holder.
The handpiece is active.
▶ Press the foot pedal.
The removed handpiece runs at the set speed or intensity.
▶ Changing speed or intensity with the foot pedal.
The left stop corresponds to the minimum speed/intensity.
The right stop corresponds to the maximum speed/intensity.
Preselect counterclockwise motor rotation
▶ Take motor off the holder.
The handpiece is active.
▶ Slide the cross switch upward.
The direction of motor rotation is reversed each time the cross-switch is actuated:
counterclockwise rotation - clockwise rotation.
The direction of motor rotation is displayed on the dentist element.
Setting the instrument light
▶ Slide the cross switch to the right. (spotlight function)
Cold light "On" (even when Cold light: "Off" is preselected).
▶ Slide the cross switch to the left.
Change the cold light status: "On/Off"
18