Setting the handpieces
▶ Press the button for "light intensity" (S4) to set the light intensity from 1 to 9 (ring counter).
S1
S2
Setting the direction of motor rotation
Note
The rotational direction of the motor can only be changed when the motor is at rest.
▶ Take motor off the holder.
The handpiece is active.
▶ Press "Motor rotational direction" on the dentist element.
The direction of motor rotation is reversed each time the switch is actuated: coun‐
terclockwise rotation - clockwise rotation.
The direction of motor rotation is displayed on the dentist element.
Setting the cooling level
▶ Remove the handpiece (such as turbine, motor) from the holder.
The handpiece is active.
▶ Press the "Preselected spray" button on the dentist element.
The cooling status is switched each time the button is pressed: air - spray.
The cooling level is displayed on the dentist and assistant element.
6.2 Turbine
The following settings can be changed with the foot control:
▪ Speed
▪ Cooling status
▪ Cold light intensity
6.3 INTRA LUX Motor KL 701 / KL 703 LED
The following settings can be changed in the menu:
▪ Direction of motor rotation
▪ Spray status
▪ Light on/off
S3
S4
14