KaVo ESTETICA E30 Short Instructions For Use page 10

Moving the patient chair
The LEDs of the "AP 0", " AP 1", " AP 2", "SP", and "LP" keys flash for approxi‐
mately four seconds.
▶ During these four seconds, briefly press the "AP 0", " AP 1", " AP 2", "SP" or "LP"
key.
The chair moves into the selected automatic position.
Saving an automatic position through the assistant element
▶ Move the chair to the desired position.
▶ Briefly press the "AP" key.
The LEDs of the "AP 0", " AP 1", " AP 2", "SP", and "LP" keys flash for approxi‐
mately four seconds.
▶ During these four seconds, press the "AP 0", "AP 1", "AP 2", "SP" or "LP" button,
until a signal sound is issued.
The display diode of the pressed button is turned on. The chair position is saved.
Recalling an automatic position through the foot control
▶ Press the "SP" foot switch.
or
▶ Press the "LP" foot switch.
The chair moves into the selected automatic position.
Saving an automatic position with the foot control
▶ Hold down the foot pedal and foot-operated button "SP", and simultaneously press
any button for an automatic position ("AP 0", "AP 1", "AP 2" or "SP") on the dentist
or assistant unit until you hear a beep.
The automatic position is saved for the foot-operated button.
or
▶ Hold down the foot pedal and foot-operated button "LP", and simultaneously press
any button for an automatic position ("AP 0", "AP 1", "AP 2" or "SP") on the dentist
or assistant unit until you hear a beep.
The automatic position is saved for the foot-operated button.
8