Setting The Handpieces; Adjusting Functions - KaVo Primus 1058 Life Short Instructions For Use

Short instructions for use 6 Setting the handpieces

6 Setting the handpieces

6.1 Adjusting functions

Switch to the settings menu of the active element
Level switching must be activated for the selection of a level.
See also:
2 4 Switching between levels and selecting a dentist, Page 13
▶ Remove the handpiece from the holder.
▶ Briefly press "Preselect level" key to select the level.
▶ Press "Preselect level" button for 4 seconds in order to change settings.
ð The display switches to the Settings menu of the selected handpiece. (Available
only with MEMOspeed licence with activated level switching in level 1-3)
Saving the values
▶ Press the "Save" key to save the values. You can save after setting each value, or
after setting all values.
ð Saving is acknowledged by a beep.
ð This closes the "Settings" menu.
Set the speed/power intensity (in levels 1 to 3 only)
▶ Press the "Decrease value" key to decrease the speed.
or
▶ Press the "Increase value" key to increase the speed.
ð The speed is shown in the display.
Set the power intensity (in levels 1 to 3 only)
▶ Press the "Decrease value" key to decrease the speed/power intensity.
or
▶ Press the "Increase value" key to increase the speed/power intensity.
ð The speed/power intensity is shown on the display.
Setting the minimum and maximum speed
▶ Press the "min/max" (S4) keyed to toggle between the settings menus for minimal
and maximal speed.
16