Supermicro X10DBT User Manual page 17

System
health
Monitoring
System
Management
Dimensions
Note: For IPMI Configuration instructions, please refer to the Embedded
IPMI Configuration User's Guide available @ http://www.supermicro.com/
support/manuals/.
System health/CPU Monitoring
•
Onboard voltage monitoring for +3.3V, 3.3V standby,
+5V, +5V standby, +/-12V, CPU core, memory, chip-
set, HT, and battery voltages
•
CPU/System overheat LED and control
•
6 switch-phase voltage regulator
•
CPU Thermal Trip support
•
Status Monitor for speed control
•
Status Monitor for On/Off control
Fan Control
•
Fan status monitoring via IPMI connections
•
Dual Cooling Zone
•
Multi-speed fan control via onboard BMC
•
Pulse Width Modulation (PWM) fan control
•
PECI (Platform Environment Configuration Interface)
2.0/TSI support
•
UID (Unit Identification)/Remote UID
•
System resource alert via SuperDoctor 5
•
SuperDoctor® 5, Watch Dog, NMI
•
Chassis Intrusion header and detection
•
19.33" (L) x 13.68" (W) (490.98 mm x 347.47 mm)
1-9
Chapter 1: Overview