Supermicro X10DBT User Manual page 76

X10DBT/X10DBT-T User's Manual
IIO1 Configuration/IIO2 Configuration/IIO3 Configuration
IOU0 (II0 PCIE Port 2)
This item configures the PCI-E port Bifuraction settings for a PCI-E port specified
by the user. The options are x4x4x4x4, x4x4x8, x8x4x4, x8x8, x16, and Auto.
IOU1 (II0 PCIE Port 3)
This item configures the PCI-E port Bifuraction settings for a PCI-E port specified
by the user. The options are x4x4x4x4, x4x4x8, x8x4x4, x8x8, x16, and Auto.
PCI-E Completion Timeout
Select Enable to issue a "time-out" command when PCI-E electric tuning is
completed. The options are Enable and Disable.
PCI-E Completion Timeout Value
Use this item to set the PCI-E Completion Time-out value. Enter a value between
260ms to 900ms.
No PCI-E Port Active EC0
This is a workaround setting when there is no active PCI-E port detected. The
options are PCU Squelch exit ignore option, and Reset the SQ FLOP by
CSR optio.
PCI Express Port 0/Port 1A/Port 1B/Port 2A/Port 2B/Port
2C/Port 2D/Port 3A/Port 3B/Port 3C/Port 3D
Use the items below to configure the PCI-E settings for a PCI-E port specified
by the user.
The following items will display:
•
PCI-E Port Link Status
•
PCI-E Port Link Max
•
PCI-E Port Link Speed
PCI-E Port
Select Enable to enable the PCI-E port specified by the user. The options are
Auto, Enable, and Disable.
PCI-E Port Link
Select Disable to disable the link that is not involved in training activities, but its
CFG is still active. The options are Enable and Disable.
4-16