Supermicro X10DBT User Manual page 82

X10DBT/X10DBT-T User's Manual
Resource Auto Adjust
Select Enable for the PCI resource-requests for each CPU socket to be auto-
matically adjusted on the need-base when the PCI resource allocator fails. The
options are Enable and Disable.
QPI Per Socket Configuration
CPU 0/CPU 1
Bus Resource Allocation Ratio
Use this feature to set the bus resource-allocation ratio (from 0-8). The default
setting is 1.
IO Resource Allocation Ratio
Use this feature to set the IO resource-allocation ratio (from 0-8). The default
setting is 1.
MMIOL Resource Allocation Ratio
Use this feature to set the Memory-Mapped IO resource-allocation ratio (from
0-8). The default setting is 1.
IIO UniPhy Disable
Select Yes to hide the entire UNIFY in L2 cache. The options are No, Yes, and
Yes w/Memory Hot Add.
Memory Configuration
This section displays the following Integrated Memory Controller (IMC) informa-
tion.
Promote Warnings
Select Enable to treat memory warnings as memory errors or memory faults for
system-level debugging. The options are Enable and Disable.
DDR Speed
Use this feature to force a DDR3 memory module to run at a frequency other
than what is specified in the specification. The options are Auto, 1067, 1333,
1600, 1867, and 2133.
4-22