Supermicro X10DBT User Manual page 98

X10DBT/X10DBT-T User's Manual
PCI Devices Option ROM Settiing
Slot1 x16 thru (through) SXB1 OPROM/Slot2 x16 thru (through) SXB1
OPROM/Slot SXB2 x8 thru (through) BPN-ADP-8SATA3-1 OPROM/Slot SXB3
x8 OPROM
Use this feature to select the type of device installed on a slot specified by the user
for the system to boot from. The options are EFI, Legacy and Disabled.
NVME thru (through) BPN-ADP-8SATA3-1 OPROM
Use this feature to select the type of NVME (Non-Volatile Memory Express) device
installed on the slot specified above for the system to boot from. The options are
EFI, Legacy and Disabled.
Onboard Video OPROM
This feature controls how the system executes UEFI (Unified Extensible Firmware
Interface), and legacy Option ROM. Select Legacy Only to boot the system using a
legacy video device. The options are Do not launch, UEFI Only and Legacy Only.
VGA Priority
This feature allows the user to select the graphics adapter to be used as the primary
boot device. The options are Onboard and Offboard.
Onboard LAN Option ROM Type
Use this item to select the device type for onboard LAN Option ROM for system
boot. The options are EFI and Legacy.
Onboard LAN 1 OpROM/Onboard LAN 2 OpROM
Select iSCSI to use the iSCSI Option ROM to boot the computer using a iSCSI
network device. Select PXE (Preboot Execution Environment) to use an PXE Op-
tion ROM to boot the computer using a PXE network device. The default option
for Onboard LAN 1 is PXE and for Onboard LAN 2 is Disabled.
ME (Management Engine) Subsystem
This feature displays the following ME Subsystem Configuration settings.
General ME Configuration
•
Operational Firmware Version
•
Recovery Firmware Version
•
ME Firmware Features
4-38