Supermicro X10DBT User Manual page 34

X10DBT/X10DBT-T Motherboard User's Manual
Memory Support for the X10DBT(-T) Motherboard
The X10DBT(-T) Motherboard supports Up to 1 TB of Registered (RDIMM) or up
to 2 TB of Load Reduced (LRDIMM) DDR3 ECC 800/1066/1333/1600 MHz 240-pin
memory modules in 32 slots (2 DIMMs per channel). For the latest memory updates,
please refer to our website a at http://www.supermicro.com/products/motherboard.
Processor & Memory Module Population Configuration
For memory to work properly, follow the tables below for memory installation.
Fully-Populated Configuration
Please follow the instructions below to populate all DIMM slots:
Processors and their Corresponding Memory Modules
CPU# Corresponding DIMM Modules for Full-Populated Configuration
CPU 1 P1M1- P1M1-
DIMM DIMM
A1/B1 C1/D1
CPU2
P2M1- P2M1-
DIMM DIMM
A1/B1 C1/D1
Half-Populated Configuration
Please follow the instructions below to populate half of the DIMM slots:
Processors and their Corresponding Memory Modules
CPU# Corresponding DIMM Modules for Half-Populated Configuration
CPU 1 P1M1-
DIMM A1/B1
CPU2 P2M1-
DIMM A1/B1
An Important Note:
•
For the memory modules to work properly, please install DIMM modules of the
same type, same speed and same operating frequency in the motherboard.
Mixing of DIMMs of different types or different speeds is not allowed.
P1M1- P1M1- P1M2-
DIMM DIMM DIMM
A2/B2 C2/D2 A1/B1
P2M1- P2M1- P2M2-
DIMM DIMM DIMM
A2/B2 C2/D2 A1/B1
P1M1- P1M2-
DIMM C1/D1 DIMM A1/B1
P2M1- P2M2-
DIMM C1/D1 DIMM A1/B1
2-12
P1M2 P1M2 P1M2
DIMM DIMM DIMM
C1/D1 A2/B2 C2/D2
P2M2 P2M2 P2M2
DIMM DIMM DIMM
C1/D1 A2/B2 C2/D2
P1M2
DIMM C1/D1
P2M2
DIMM C1/D1