Supermicro X10DBT User Manual page 87

Chapter 4: AMI BIOS
Closed Loop Thermal Throttling
Select Enabled to support Closed-Loop Thermal Throttling which will improve
reliability and reduces CPU power consumption via automatic voltage control
while the CPU are in idle states. The options are Disabled and Enabled.
Memory Hot Sense Thermal Throttling
Select Enabled to activate thermal-throttling when the hot-sensor reaches the
predefined threshold via automatic voltage control when the CPU is in idle states.
The options are Enabled and Disabled.
Memory Hot Output Thermal Throttling
Select Enabled to provide thermal-throttling warnings when the hot-sensor
reaches the predefine threshold via automatic voltage control when the CPU is
in idle states. The options are Enabled and Disabled.
MC ODT Mode
This feature sets the ODT (On-Die Termination) mode for the memory controller.
The options are Auto, 100 Ohms, and 50 Ohms.
MRC (Memory Reference Code) Promote Warnings
Select Enabled for the system to provide MRC warnings to improve memory
performance. The options are Enabled and Disabled.
Num (Number) of Sparing Transac (Transaction)
Use this feature to set the number of memory sparing transactions that will allow
data to be written from a failing component to another component to ensure data
security. The options are 4.
PSMI Support
Select Enabled for Power Supply Management Interface (PSMI) support. The
options are Enabled and Disabled.
VMSE Clock Stop
Select Enabled to de-activate the clock driver for the Intel Scalable Memory
Interconnect 2 (Intel SMI 2) controller. The options are Enabled and Disabled.
Safe MC (Micro Code) BGF (Buffer Generation First-in-First-Out) PSV
Select Enabled to use the Micro-Code Safe mode to allow the onboard power
control mechanism to supply power to the memory buffer on the on-demand basis
in an effort to save power consumption. The options are Enabled and Disabled.
4-27