Troubleshooting Pics On The M40E Router - Juniper M40E Hardware Manual

Related
Documentation

Troubleshooting PICs on the M40e Router

Problem
Solution
Copyright © 2010, Juniper Networks, Inc.
All manuals and user guides at all-guides.com
user@host> show chassis fpc detail 0
Slot 0 information:
State
Temperature
Total CPU DRAM
Total SRAM
Total SDRAM
I/O Manager ASIC information
0
I/O Manager ASIC information
0
Start time:
Uptime:
For further description of the output from the commands, see the Junos OS System
Basics and Services Command Reference.
M40e FPCs Supported on page 17
Holding an M40e FPC Overview on page 133
Installing an FPC in an M40e Router on page 193
M320 Flexible PIC Concentrator (FPC) Description
The PICS are not functioning normally.
To troubleshoot the PICs:
Check the status of the LEDs located on the PIC faceplate. Many PICs have an LED
1.
labeled STATUS on their faceplate. Some PICs have additional LEDs, often one per
port. For information about the LEDs on each PICs, see the M40e Multiservice Edge
Router PIC Guide.
Issue the following CLI command to check the status of a PIC:
2.
user@host> show chassis fpc pic-status
Slot 0 Online
PIC 0 Online
PIC 1 Online
PIC 2 Online
PIC 3 Online
Slot 1 Online
PIC 0 Online
PIC 1 Online
For further description of the output from the command, see the Junos OS System
Basics and Services Command Reference.
The PIC slots are numbered from
Chapter 15: Troubleshooting M40e Hardware Components
Online
37 degrees C / 98 degrees F
32 MB
4 MB
128 MB
Version 3.0, Foundry IBM, Part number
Version 3.0, Foundry IBM, Part number
2003-03-31 20:54:30 PDT
25 days, 8 hours, 5 minutes, 32 seconds
DPC 40x 1GE R
10x 1GE(LAN)
10x 1GE(LAN)
10x 1GE(LAN)
10x 1GE(LAN)
MX FPC Type 3
1x OC-192 SONET
1x OC-192 SONET
through , top to bottom
0 3
153