Control Settings; Defaults - ETC Releve Spot User's Operation Manual

Control Settings

Control Settings
DMX Address
Channel Mode
Data Loss
DMX Address - Displays the current DMX512 address. Press Enter o to edit the address.
•
Default Address is 001. Accepts values 1 - 488.
Channel Mode - Displays the current DMX Channel Mode. Press Enter o to edit the
•
mode. Default mode is Standard. Options include:
Direct - requires 25 channels of control
-
Standard - requires 20 channels of control.
-
Data Loss - Displays the current data loss setting. Press Enter o to edit the setting. Default
•
setting is Hold (Hold Last Look).
Hold - After data is lost, the luminaire maintains its last look until power is removed or
-
control signal is restored. The last look will not be restored after power has been cycled.
Wait and Fade - After data is lost, the luminaire waits a specified period of time
-
(settable from 0 to 240 seconds) then fades intensity only.

Defaults

Menu Selection Default Value
DMX Address
Channel Mode
Data Loss
30
1
Direct
Hold
001
Standard
Hold
Relevé Spot User Operations Manual