Operation; Dmx Channel Mode - ETC Releve Spot User's Operation Manual

Operation

DMX Channel Mode

Relevé Spot has two modes of operation, which are accessible in the Control Settings menu
from the user interface.
Standard Mode utilizes 20 channels of control. This is the default setting.
•
Standard Mode enables efficient use of DMX channel bandwidth.
-
Direct Mode utilizes 25 channels of control.
•
Direct Mode enables individual control of the luminaire features.
-
Note:
When operating in Standard Mode, each luminaire makes accommodations for the
specific LEDs in its array and produces output that is consistent with other luminaires,
whether or not they utilize LEDs from the same production batch.
Operating in Direct Mode bypasses this calibration, and multiple luminaires may
produce slightly different outputs when controlled as a group.
Standard Mode
Channel Parameter
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
Operation
The color output of all Relevé Spot luminaires is calibrated at the factory.
Intensity
Red
Green
Blue
Strobe
Pan Coarse
Pan Fine
Tilt Coarse
Tilt Fine
Gobo Mode
16-bit Gobo Index Coarse 11
16-bit Gobo Index Fine
Ani-gobo Mode
Ani-gobo Index
Focus Coarse
Focus Fine
Zoom
Iris
Frost
Configuration
Direct Mode
Channel Parameter
1 Intensity
2 Red
Green
3
4 Blue
5 Lime
Strobe
6
7 Pan Coarse
8 Pan Fine
9 Tilt Coarse
10 Tilt Fine
Gobo Mode
12 16-bit Gobo Index Coarse
13 16-bit Gobo Index Fine
14 Ani-gobo Mode
15 Ani-gobo Index
16 Focus Coarse
17 Focus Fine
18 Zoom
19 Iris
20 Frost
37