1. Remove and clean the atomizer housing.
2. Remove the atomizer head and stainless steel plumbing. The atomizer head is
removed by removing the stainless steel plumbing and then loosening the set
screw found on the bottom side of the atomizer head. The atomizer head can
then be disassembled (below), for easier cleaning. It is threaded together and
can simply be unscrewed.
3. Reinstall the atomizer head and plumbing. Grease the bearing and spin the
atomizer head a few times to ensure all grease has been worked into the
bearings.
1. Remove the shields and clean out any seed that may have fallen underneath the
drum.
2. Lubricate the chain to keep from corroding in storage.
LP2000 with Seed Wheel
ATOMIZER CHAMBER
ROTATING DRUM
USC,
LLC
Page 61