5 . Wrap it with the insulation tape twice or more and position your contraction tube in the middle of the insulation tape .
Three or more layers of insulation are required .
f Method 1
6 . Apply heat to the contraction tube to contract it .
7 . After tube contraction work is completed, wrap it with the insulation tape to finish .
• Make sure that the connection parts are not exposed to outside .
• Be sure to use insulation tape and a contraction tube made of approved reinforced insulating materials that have
the same level of withstand voltage with the power cable . (Comply with the local regulations on extensions . )
• In case of extending the electric wire, please DO NOT use a round-shaped Pressing socket .
- Incomplete wire connections can cause electric shock or a fire .
EHS MONO Kit-EU_IM_05388A-04_EN.indd 13
f Method 2
2016-06-23 오후 3:42:58