SIM (Serial Input Module) MIM-B12 Air Conditioner installation manual This manual is made with 100% recycled paper. imagine the possibilities Thank you for purchasing this Samsung product. KO EN ZH DB98-26745A-04 SIM_MIM-B12_EN_IM_26745A-04.indd 11 2014-05-09 오후 5:31:43...
Safety Precautions Make sure to read the following safety precautions carefully before installation. (Refer to the optional installation of the installation manual.) WARNING This indicates the possibility of serious injury or death. CAUTION This indicates the possibility of serious injury or damage to environments when operated incorrectly.
Page 4
CAUTION Do not install the unit in a place where it Do not install the unit near dangerous is exposed to inflammable gas leakage. places where it is exposed to machine oil or steam. It could cause fire or explosion. ...
Page 5
Installing the SIM (Serial Input Module) SIM (Serial Input Module) Accessories Installation Manual Caution The SIM must be installed by a qualified installer. Make sure the main power is turned off before installing the SIM. The wires must be installed according to the national electrical wiring regulations.
Page 6
SIM (Serial Input Module) Structure Comm. (RS-485 power meter) Install indoors and inside of the distribution kit Power Power S-NET 3 (Power meter I/M) Power Meter System A/C Duct type Split type 1 Way 4 Way Outdoor unit Cassette type Cassette type Caution Power meter, SIM(Power meter I/M), ELB or NFB should be...
Page 7
Installing the SIM (Serial Input Module)(Continued) SIM (Serial Input Module) Structure Unscrew the 4 screws on the SIM (Serial Input Module) to open the cover. Connect a DC 12V adaptor to the power terminal on the SIM. The following adaptor should be used. ...
Page 8
Setting the SIM (Serial Input Module) address Unscrew the 4 screws on the SIM (Serial Input Module) to open the cover. Use the rotary switch (DS01) on SIM to set the communication address. The address of SIM can be set from 0 to 7. ...
Page 9
Installing the SIM (Serial Input Module)(Continued) SIM (Serial Input Module) Startup Order The following order is displayed when SIM is powered on. Display Window 7-Segment LED display All on SIM (Serial Input Module) address ex) 00 SIM (Serial Input Module) program version ...
Page 10
SIM (Serial Input Module) LED display and buttons LED display DIS2 DIS3 DIS4 SIM I/M Connect to Power Cable communication (DC12V) Buttons cable Reference Reference Color Status LED01 Turns on when power is on LED02 Yellow Turns on when communicating with DMS LED03 Green Flickers when communicating with the power meter on CH1...