No. of wires
Example of sensor installation (TW3 / TW4)
Weld the sensor holder on the selected location of the pipe and then insulate it .
When the pipe is a copper pipe
• When the holder sensor cannot be welded on the pipe, fix the senor with aluminum tape and insulate it .
EHS MONO Kit-EU_IM_05388A-04_EN.indd 43
> 0 . 7 5 mm
1 . Before the installation, control kit should be turned off .
2 . Using the appropriate equipment to correct position of terminal
, H05RN-F or H07RH-F
block as shown on the diagram .
When the pipe is not a copper pipe
Field supply (230 V~, Input)
2016-06-23 오후 3:43:11